11 Speed Cassette on 10 Speed Hub Road Bike

11 Speed Cassette on 10 Speed Hub Road Bike? You betcha! I was skeptical at first, but after doing some research and trying it out for myself, I can say with confidence that it works great!

There are a few things you need to know before you attempt this upgrade. First, you’ll need an 11 speed compatible freehub body. Second, the cassette needs to be Shimano or SRAM because they use a 1.85mm spacer on the 10th cog.

Third, you might need to file down the hub’s lockring threads a bit so everything fits together snugly. Assuming you have all the right parts and tools, installing an 11 speed cassette on a 10 speed hub is actually pretty easy. Just remove the old cassette and spacers, then install the new ones in their place.

Be sure to use plenty of grease on all the threaded parts – this will help prevent stripping and make removal easier down the road. With everything tightened up properly, you’re ready to hit the road! The wider range of gears offered by an 11 speed cassette can be a real game-changer when climbing hills or accelerating out of corners.

Not to mention, it just looks really cool having those extra cogs hanging off your rear wheel!

11 Speed Cassette on 10 Speed Hub Road Bike Is it possible to use an 11 speed cassette on a 10 speed hub road bike? The answer is yes, with a few caveats.

First off, your chainline will be slightly off, so you may experience some shifting issues. Secondly, your cassette needs to have the same number of teeth as your original 10 speed cassette – otherwise, your gearing will be thrown off and you could damage your drivetrain. Lastly, make sure that you have the correct spacers for your wheelset.

With all of that said, using an 11 speed cassette on a 10 speed hub road bike is definitely doable – just be aware of the potential issues that could arise.

11 Speed Cassette on 10 Speed Hub

Can You Use an 11 Speed Cassette on a 10 Speed Hub?

While an 11 speed cassette will physically fit on a 10 speed hub, the spacing between the cogs is not compatible. This results in poor shifting performance and can damage your drivetrain. It’s best to stick with cassettes that are made for your specific drivetrain.

Can I Change My Cassette from 10 Speed to 11 Speed?

If you’re looking to upgrade your cassette, the good news is that you can usually switch from a 10-speed to an 11-speed without having to replace your entire drivetrain. The even better news is that this upgrade is relatively inexpensive and easy to do yourself. Here’s what you need to know about making the switch:

The first thing to note is that not all cassettes are created equal. In general, Shimano and SRAM cassettes are compatible with each other, but you’ll want to double check before making a purchase. Once you have the right cassette, simply remove the old one and install the new one in its place.

There are a few things to keep in mind when changing cassettes. First, if your bike has been ridden with a 10-speed cassette for awhile, it’s likely that the chain has stretched to fit that specific cogset. As a result, you may need to buy a new chain when switching to an 11-speed cassette.

Second, while most cassettes will work with both Shimano and SRAM derailleurs, it’s always best to match brands (i.e., use a Shimano derailleur with a Shimano cassette). Finally, because of differences in cog sizes between 10- and 11-speed cassettes, you may need to adjust your derailleur’s limit screws after installing the new cassette. Overall, upgrading from a 10-speed to an 11-speed cassette is a fairly simple process that can be completed in just minutes.

And best of all, it doesn’t require any special tools or skills – just some basic bike knowledge and mechanical know-how.

Are 10 And 11 Speed Cassettes the Same Width?

The short answer is no, 10 and 11 speed cassettes are not the same width. The difference in width is due to the different number of cogs/speeds on each cassette. 10 speed cassettes have a cog width of 2.85mm while 11 speed cassettes have a cog width of 2.6mm.

This might not seem like much, but it does make a difference when you’re trying to install or remove a cassette from your bike. If you’re unsure which size you need, it’s always best to check with your local bike shop or the manufacturer of your bike/cassette before making a purchase.

Can I Use an 11 Speed Front Derailleur on a 10 Speed Cassette?

In short, no. An 11 speed front derailleur is not compatible with a 10 speed cassette. This is because the cage of the derailleur is too wide and will not line up correctly with the teeth on the cassette.

Additionally, the shifter for an 11 speed drivetrain is not compatible with a 10 speed cassette. So, if you are upgrading your drivetrain from 10 speed to 11 speed, you will need to replace both the front derailleur and the rear cassette.

Fitting an 11 Speed Cassette on a 10 Speed Hub (Shimano Hack Tip)

Convert 10-Speed Cassette to 11-Speed

If you have a 10-speed bike and want to upgrade to an 11-speed drivetrain, you’ll need to replace your cassette. This can be a bit of a challenge, but with the right tools and knowledge it’s definitely doable. Here’s what you need to know about converting a 10-speed cassette to 11-speed.

The first thing you’ll need is an 11-speed compatible freehub body. You can usually find these online or at your local bike shop. Once you have the new freehub body, you’ll need to remove your old 10-speed cassette.

This can be done with a chain whip and lockring tool. With the old cassette removed, simply thread on the new 11-speed cassette. Make sure that it is fully seated before tightening down the lockring.

Once everything is tight and secure, test it out by going for a ride!

Conclusion

If you’re a road cyclist with a 10-speed drivetrain, you might be wondering if you can use an 11-speed cassette on your bike. The short answer is yes, but there are a few things to keep in mind before making the switch. First off, an 11-speed cassette will require a new chain.

This is because the inner and outer plates of an 11-speed chain are narrower than those of a 10-speed chain, so they can’t fit on a 10-speed cogset. Additionally, you’ll need to make sure that your rear derailleur is compatible with an 11-speed cassette. Most newer models should work fine, but it’s always best to check with your bike’s manufacturer or dealer just to be sure.

Once you’ve got the right parts, installing an 11-speed cassette on a 10-speed hub is actually pretty easy. Just remove the old cogset and chain, then thread on the new ones following the same pattern (innermost cog first). Be sure to tighten all the lockrings and bolts securely before heading out for a ride!

+ posts