160Mm Fork on 140Mm Bike

A 160mm fork on a 140mm bike is not ideal. The extra 20mm of travel will make the bike feel less responsive and more sluggish. It will also put more stress on the frame, which could lead to problems down the road.

If you’re set on running a 160mm fork, you might be better off getting a 150mm bike.

A lot of people ask if it’s okay to put a 160mm fork on a 140mm bike. The answer is yes, but there are a few things you need to keep in mind. First, your headtube will be taller with the 160mm fork, so you may need to raise your stem by a few millimeters.

Second, the extra travel could make your bike feel more sluggish and less maneuverable, so it’s important to test ride it before committing to the change. Lastly, you’ll need to make sure your brakes are compatible with the larger fork – some brands have different caliper sizes for their different forks. Overall, putting a 160mm fork on a 140mm bike is perfectly fine as long as you’re aware of the potential trade-offs.

160Mm Fork on 140Mm Bike

Can I Put a 150Mm Fork on a 120Mm Bike?

If you’re looking to make your 120mm bike a little more capable on the trails, one option is to install a 150mm fork. This will slacken out the head angle and raise the bottom bracket, making the bike more stable at speed and better able to soak up big hits. However, there are a few things to keep in mind before making this upgrade.

First, your bike’s frame may not have enough clearance for a 150mm fork. You’ll need to check with your frame manufacturer to see if this is the case. If it is, you may be able to get away with installing a 140mm fork instead.

Second, your bike’s suspension components may not be designed for use with a 150mm fork. If this is the case, you could end up damaging your suspension or voiding your warranty by making the switch. Again, it’s best to check with your manufacturer before making any changes.

Third, switching to a 150mm fork will change the geometry of your bike significantly. The head angle will be slacker and the bottom bracket will be higher, so handling at slow speeds will be more difficult. This isn’t necessarily a bad thing – many riders prefer the stability that comes with these geometry changes – but it’s something to keep in mind before making the switch.

Overall, installing a 150mm fork on a 120mm bike can be done but it’s not as simple as just swapping out forks.

Can I Put a 160Mm Fork on a Hardtail?

If you’re looking to put a 160mm travel fork on your hardtail mountain bike, there are a few things you need to know. First off, while many frames can accommodate this type of fork, not all will. You’ll need to make sure that your frame has sufficient clearance for the larger fork.

Additionally, if your bike isn’t designed for a suspension fork, it’s likely that the geometry will be thrown off and the ride won’t be as good as it could be. That said, if you’re confident in your ability to make these adjustments, a 160mm travel fork can definitely be used on a hardtail mountain bike – just be prepared for some tweaks along the way.

Can You Put a Higher Travel Fork on a Bike?

If you’re looking to raise the front end of your bike for increased clearance, or just want a taller fork, you might be wondering if it’s possible to install a taller travel fork. The answer is yes, but there are a few things to keep in mind. First, your bike’s frame needs to have enough space to accommodate the longer fork.

This means that if you have a smaller frame, you might need to get creative with how you route your cables and brake lines. Additionally, your headset might need to be replaced or adjusted in order to work with the new fork. Second, make sure that the taller fork has compatible components.

For example, if your bike uses disc brakes and the new fork is only compatible with rim brakes, then you’ll need to get new brakes as well. Additionally, the axle size on the new fork should match up with what’s on your wheelset. Finally, keep in mind that installing a taller travelfork will change the geometry of your bike.

This could affect how your bike handles so it’s important to test ride it before committing to any changes. Overall, installing a taller travelfork is definitely possible but there are some things that you need to take into consideration first. By keeping these things in mind, you can ensure that everything goes smoothly and that your bike continues to ride safely and efficiently.

Can I Put 120Mm Forks on a 140Mm Bike?

If you’re looking to make your 140mm bike a bit more versatile, you may be wondering if you can put 120mm forks on it. The short answer is yes, but there are a few things to keep in mind. First, the headtube on your frame needs to be long enough to accommodate the shorter fork.

Second, because the 120mm fork will be shorter than the original 140mm fork, your bike’s geometry will change slightly. This could affect how the bike handles and feels on the trail. If you’re comfortable making these adjustments, then putting a 120mm fork on your 140mm bike can be a great way to make it a bit more versatile.

Just remember to take things slowly at first as you get used to the new setup.

We Put An 180mm Enduro Fork On An XC Bike! | Why NOT To Over Fork Your Bike

160Mm Fork on 130Mm Frame

A 160mm fork on a 130mm frame is not an ideal setup. The extra travel will make the bike feel unstable and the front end will want to wash out in corners. It’s not impossible to make it work, but it’s not ideal.

If you’re looking for a bike with a bit more travel, I would recommend getting a 150mm or 140mm fork. Otherwise, stick with a 130mm fork.


If you’re looking to upgrade your mountain bike, one of the first things you’ll need to consider is the fork. In this article, we’ll discuss what to look for when choosing a new fork, as well as how to install it. When choosing a new fork, the most important thing to consider is compatibility.

You’ll need to make sure that the fork you choose is compatible with your frame and headset. Additionally, you’ll need to decide on the travel – this is the amount of suspension that the fork will provide. A fork with more travel will be heavier and may affect the handling of your bike, so it’s important to choose wisely.

Once you’ve chosen the right fork for your bike, installing it is relatively straightforward. However, there are a few things you’ll need to keep in mind. First, make sure that your headset is properly installed and adjusted.

Next, remove the old forks from your bike – this can be done by loosening the bolts that hold them in place. Once they’re removed, simply slide in your new forks and tighten them down. Finally, check all of your cables and brakes before taking your bike out for a spin!

+ posts