How To Convert Bike To Disc Brakes

If you’re looking to convert your bike to disc brakes, there are a few things you’ll need to take into account. First and foremost, you’ll need to make sure that your frame and fork can accommodate disc brakes – not all bikes are compatible. Additionally, you’ll need to consider wheel compatibility, as not all wheels will work with disc brakes.

Once you’ve taken these factors into account, converting your bike to disc brakes is relatively straightforward.

  • Bike disc brakes typically come in two varieties: mechanical and hydraulic
  • The main difference between the two is that hydraulic brakes are self-contained, meaning they have fluid in them that transfers the force from your handlebar-mounted lever to the caliper at the wheel
  • Mechanical brakes don’t have this extra step; instead, the wire that runs from your brake lever is directly connected to the caliper
  • If you’re not sure which type of bike disc brake you have, look at how many cables are running from your handlebars to each wheel
  • One cable means it’s a mechanical brake, while two cables indicate a hydraulic setup
  • To convert your bike to disc brakes, you’ll need a few things: new discs, either 160mm or 180mm; new adapters for your wheels; and either new levers or new calipers (or both)
Convert Bike To Disc Brakes

How Do I Convert My Bike to Disc Brakes

There are a few things you need to take into consideration when converting your bike to disc brakes. The first is what kind of fork you have. If you have a suspension fork, then you will need an adapter to fit the disc brake caliper onto the fork.

If you have a rigid fork, then you will need to replace the entire fork with one that has disc brake tabs. The next thing to consider is what kind of wheels you have. Disc brakes work best with wheels that have a hub designed for disc brakes (i.e. Centerlock or 6-bolt).

You can use adapters to mount disc brakes on wheels that don’t have these hubs, but it’s not ideal and can cause problems down the road. Finally, you need to decide what brand and model of disc brakes you want. There are many different brands and models out there, so do some research and find the ones that best suit your needs and budget.

Once you’ve gathered all the necessary parts, follow these instructions to convert your bike to disc brakes: 1) Remove the old wheel from your bike and install the new wheel with disc brake rotor (make sure it’s properly secured!). 2) Remove your old brake calipers from the frame/fork (if applicable).

3) Install the new brake calipers onto the frame/fork using either bolts or an adapter (if necessary). Make sure they’re installed in such a way that they won’t rub on anything when in use! 4) Attach the appropriate cables/hoses from each lever to each caliper – be careful not make any mistakes here, as incorrect routing can lead to poor braking performance or even damage!

5) Test everything out before going for a ride – squeeze each lever individually and check that both pads make contact with both sides of the rotor without rubbing anywhere else on the wheel/frame/fork. Also test that both levers feel firm and responsive, without too much free play. 6) Once everything checks out, go enjoy your newly converted bike with its awesome stopping power!

How To Convert To Disc Brakes From V-Brakes On Mountain Bike

Conclusion

Disc brakes are a type of brake that use calipers to squeeze pairs of pads against a disc or “rotor” to create friction. This friction slows the rotation of the wheel, stopping the bike. Mountain bikes and newer road bikes, but they can be retrofitted onto older bikes with some adapters.

Converting your bike from rim brakes to disc brakes is not as difficult as it may seem. You will need to purchase a new set of disc brakes and discs, as well as some adapters if your bike does not have mounting holes for discs. Once you have all the necessary parts, you will need to remove your old rim brake calipers and install the new disc brake calipers in their place.

Then, you will mount the discs onto the wheels and bleed the brakes before testing them out on a ride. With some patience and following these simple steps, you can convert your bike to disc brakes in no time!

Author