How to Find a Master Link on a Bike Chain

If your bike chain has come off and you don’t know how to put it back on, don’t worry! This is a common problem that can be easily fixed with a little bit of know-how. The first thing you’ll need to do is find the master link.

This is the link that connects the two ends of the chain together. It’s usually easy to spot because it’s a different color than the rest of the links. Once you’ve found the master link, simply push it back into place and your bike chain will be as good as new!

  • Examine your bike chain to see if it has a master link
  • This is a small, removable link that holds the ends of the chain together
  • If your chain does not have a master link, you will need to remove one of the side plates using a chain tool
  • Once you have removed a side plate, you can slide the chain off of the sprockets
  • Inspect each end of the chain to find two outer links that are held together by a pin
  • These are called “offset” links, and they are what hold the rest of the chain together
  • Carefully push or tap out the pins from both offset links using a punch or other blunt object until they are flush with the outside of the links
  • With both pins removed, you should now be able to separate the two offset links and take the chain apart
how to Find a Master Link on a Bike Chain

Does My Chain Have a Master Link?

If you’re not sure whether or not your bike has a master link, there are a few ways to check.

First, take a look at your chain. If it has two plates that are connected by a pin in the middle, then it likely has a master link.

Another way to tell is by looking at how the chain connects to the cogset in the rear – if there’s a removable link there, then it’s probably a master link.

Finally, you can try shifting gears; if the chain comes off easily, then it’s likely that there is a master link somewhere.

How Do I Know My Master Link Size?

There are a few ways to determine your master link size. The first is to measure the inside width of your chain. This can be done with a caliper or a ruler.

The second is to count the number of links in your chain. To do this, simply lay your chain flat and count the number of times the link passes through itself. Finally, you can reference a bike specific chart like this one from Park Tool.

Once you have determined your master link size, it is important to choose the right type of master link. There are two types of master links- reusable and one-time use. Reusable master links can be removed and installed multiple times without damaging the link or requiring special tools.

One-time use master links are just that- they should only be used once and then discarded. These type of links are often found on lower-quality chains and generally aren’t as strong or durable as their reusable counterparts. When installing a new chain, always use a new master link- even if it is the same size as your old one.

This will ensure that your new chain has the strongest possible connection.

Do Old Bike Chains Have a Master Link?

If you have an old bike chain, it’s likely that it doesn’t have a master link. Master links are a relatively new invention, and most older bike chains didn’t come with them. That said, it’s possible to retrofit a master link onto an old bike chain.

Doing so can be helpful if you ever need to remove or replace the chain, as it will make the process much simpler. To do this, you’ll first need to purchase a master link that is compatible with your chain. Then, using a pair of pliers, you’ll need to remove one of the outermost links from the chain.

Next, you’ll insert the master link into the space where the removed link was and then use the pliers to secure it in place. Finally, reattach the outermost link to the other end of the master link. At this point, your old bike chain should now have a functioning master link!

Are All Chain Master Links the Same?

Chain master links are not all the same. In fact, there are many different types and sizes of chain master links available on the market today. The most common type of chain master link is the clip-style link, which is used to connect two pieces of chain together.

There are also rivet-style links, which are permanent and cannot be removed without damaging the chain. Finally, there are also locking-type links, which use a set screw or Allen wrench to lock the link in place.

Bicycle Chain Master Links: Tips & Tricks KMC Shimano SRAM

Bicycle Chain Master Link

A bicycle chain master link is a critical component to the functioning of your bike. It is the link between the two ends of your chain and ensures that your chain stays in place and does not come loose. Without a master link, your chain could come off while you are riding, which could be extremely dangerous.

There are two types of master links: riveted and non-riveted. Riveted master links have a permanent connection between the inner and outer plates, while non-riveted ones use a removable pin to hold everything together. Non-riveted master links are generally considered to be stronger and more reliable, but they can be more difficult to remove if you need to make repairs or replace your chain.

Installing a new master link is relatively simple, but it is important to make sure that you get the correct size for your bike. Most chains will have either an 8 or 9 speed configuration, so be sure to check before you purchase anything. Once you have the right-sized link, simply line up the plates and push the pin through until it clicks into place.

For extra security, you can use a pair of pliers to gently squeeze the sides of the link together so that it cannot come apart accidentally. If you ride often, it is a good idea to check your master link periodically to make sure that it is still secure. If it starts to look worn or damaged, it is probably time for a replacement.

Keeping your bicycle in good working order is crucial for safety, so don’t neglect this important part!

Bicycle Chain Master Link Removal

If you’re reading this, then chances are you need to remove the master link from your bicycle chain. Fortunately, it’s not a difficult process… as long as you have the right tools. First things first, you’ll need a chain tool.

This is a specialized tool that allows you to push out and pull in pins on the chain. Most bike shops will have one, or you can purchase one online or at a sporting goods store. Once you have your chain tool, locate the master link on the chain.

It will be easy to spot because it will be the only link that has an opening (called a “ramp”) on one side. The other side of the master link will have a closed end with no opening. Using your chain tool, push out the pin on the ramp side of the master link until it is flush with the outer plate of the link.

At this point, you should be able to slide the two halves of the master link apart by hand (one half will still be attached to each end of the chain). If they are stubborn and don’t want to budge, try pushing out both pins completely and then gently prying them apart with your fingers or another small object like a flat head screwdriver. With the master link removed, your chain is now ready to be taken off for cleaning or replacement!

Do All Bike Chains Have a Master Link

If you’re a cyclist, you know that keeping your bike in good working order is important. One of the most essential parts of your bike is the chain – after all, it’s what helps to power your ride. But have you ever wondered if all bike chains have a master link?

The answer is no – not all bike chains have a master link. In fact, many cyclists choose to forego the use of a master link altogether. So why is this?

Well, there are a few reasons. First and foremost, using a master link can make it easier for your chain to come off while you’re riding. This can be especially dangerous if you’re riding at high speeds.

While it’s possible to secure a master link properly, it’s also possible to do it incorrectly – and that could lead to disaster on the road. Secondly, master links can also add weight to your chain – which isn’t ideal if you’re trying to shave ounces off your bike for racing or other competitions. Every little bit counts when you’re trying to go fast!

Finally, some cyclists simply prefer the look of their bikes without a master link. To each their own! So there you have it – three reasons why not all bike chains have a master link.

Do you use one on your own bike?

Kmc Master Link

Kmc Master Link

KMC master link is an important part of a chainset, as it ensures the chain stays tight on the sprockets. It also makes the removal and installation of the chain much easier. KMC produces high-quality master links that are compatible with most chainsets on the market.

Bike Chain Master Link Sizes

Bike Chain Master Link Sizes: Do you know what size master link your bike chain uses? If not, don’t worry – we’re here to help!

In this blog post, we’ll go over the different sizes of master links used on bike chains, so you can be sure to get the right one for your ride. The most common size of master link used on bike chains is 8mm. This size will work with most standard chain widths, including 1/2″, 9/16″, and 5/8″. If you have a wider chain, such as 3/4″ or 1″, you’ll need a larger master link, such as 10mm. And if you have a narrower chain, such as 3/8″ or 7/16″, you’ll need a smaller master link, such as 6mm.

Now that you know what size master link your bike chain needs, be sure to pick up the right one next time you’re at the store!

Master Link Bike Chain near Me

If you’re a bike enthusiast, then you know the importance of having a good-quality chain. And if you’re looking for a master link bike chain, then you’ll want to find one that’s durable and compatible with your bicycle. But where can you find one?

The best place to start your search is actually online. There are many different online retailers that sell master link chains, and they usually have a wide selection to choose from. Plus, it’s easy to compare prices and find the best deal.

Once you’ve found a few potential options, it’s time to head to your local bike shop and take a look at them in person. This way, you can get a feel for the quality and see if they’re compatible with your bike. If not, then you can always order one online.

When it comes to choosing a master link bike chain, there are definitely some things to keep in mind. But as long as you take your time and do your research, you should be able to find the perfect option for your needs!

Bike Chain Master Link Install

If you have ever worked on a bike, then you know that one of the most important parts of the bike is the chain. The chain is what makes the bike move, and without it, the bike would not be able to function. The chain is also one of the most delicate parts of the bike, and if it is not properly maintained, it can break easily.

One way to make sure your chain does not break is to install a master link. A master link is a small metal clip that connects two ends of the chain together. This prevents the chain from breaking in half if it gets caught on something or if there is too much tension on the chain.

Installing a master link is a relatively easy process that anyone can do with just a few tools. The first step is to remove the old chain from your bike. You will need a pair of pliers for this step.

Once the old chain has been removed, take a look at your new chain and find the master link. The master link will have two small loops on either side that the other links fit into. Next, take one end of the new chain and thread it through the rear derailleur (this is the part of the bike that moves the chain between gears).


If you’re new to bike maintenance, one of the first things you’ll need to learn is how to find a master link on your chain. A master link allows you to take your chain off without having to use a chain tool, which can be handy if you’re in a pinch. Here’s a quick guide on how to find a master link on your bike chain.

Start by looking for two small metal plates that are connected by a pin. These are called “master links” and they’re what hold your chain together. If you can’t see any master links, it’s likely that your chain doesn’t have one and you’ll need to use a chain tool to remove it.

Once you’ve found the master link, gently push the pin out with your fingers or a small flat-head screwdriver. Be careful not to lose the small retaining clip that holds the pin in place! With the retaining clip removed, you should now be able to pull the two halves of the master link apart and remove your chain.


  • Shafin Al Mahmud

    Shafin is a biker and writer from Amana Colonies, IA, USA. where he resides in a small village. With a passion for cycling and a talent for words, Shafin has made a career out of sharing his love of the sport with others. Whether he's reviewing the latest gear, offering training tips, or simply sharing his adventures on two wheels, Shafin's articles are always informative, insightful, and inspiring. As a local resident of Amana Colonies, Shafin brings a unique perspective to his writing, offering readers a glimpse into the biking culture and community of his home region. So if you're a fellow biker or just a fan of the sport, be sure to check out Shafin's articles – you won't be disappointed.